Bewator BM3 - Troubleshooting Common Issues

30 BM3 Installation & User Manual
ENG
Troubleshooting
Problem Possible cause Action
Nothing hap-
pens when a
code is entered.
The code is
timed.
Check connect-
ed time clock.
Unable to enter
programming
mode. Red LED
lit after two
trials.
Wrong pass-
word.
Determine the
correct pass-
word.
Green LED lit
following an
accepted code,
but the door
does not open.
Lock fault. Check cable
between door
telephone and
lock. Change
locks.
Link between
block nos 1 and
4 in Bewacom is
missing.
Attach link.
The B button
is pressed, but
no dial tone is
heard.
Faulty connec-
tion between
Bewacom and
telephone sys-
tem.
Check connec-
tions and cable.
The door tele-
phone extension
is not analogue.
Check the tel-
ephone system.
Connect an
ordinary push-
button tel-
ephone instead
of Bewacom.