Beyonwiz V2 - 1.5 Technical Specifications

Chapter 1. Introduction 9
1.5 Technical Specifications
Front Panel
 Display:
 Power Button:
Rear Panel
7 Segment display can display time, Recording Status,
Boot Progress & Firmware Update Info.
Standby On/Off & Start USB Upgrade
Power
 Mains voltage:
 Power consumption:
240 - 12V 2.0A
Power Adapter 65/40/<1 Watts
(Max./typ. operation/
stand-by)
 Power Switch:
 Terrestrial-RF input/output:
 Video/Audio output (digital):
 Audio output (digital):
 USB:
 Ethernet:
 AV Output (Analogue)
 SD Card
Rear switch
1 input / 1 loop outputs
HDMI
S/PDIF Optical
1 x USB 3.0 / 1 x USB 2.0
1 x 10/100/1000 GIGA LAN
Adapter Required (Sold separately in Beyonwiz online shop.
Micro SD Expansion Slot