42 System Configuration
Backing up & Restoring your Settings
The V2 allows you to Backup your settings, this is a very useful tool that backs up your Timers,
Channels, favourites, network and other custom settings so that in the event you have to
perform a factory reset or you upgrade the software you can restore these settings so you do
not have to spend time setting these things up again.
From time to time you may be required to reset the factory settings, it may be required when
applying a particular upgrade or for troubleshooting problems, you can back up your settings
before hand as explained at the top of this page.
Press 'OK' on Factory reset and you will a
popup message to confirm, read the
caption and then select 'YES' to continue.
Your V2 will then reboot, once it has
rebooted it will give you the option to
Restore Settings from the back up you
made.
Create a Backup
Press Menu>Setup>Software
manager>Create Backup and you
should get a confirmation that backup
is done.
Restore Backup
To restore from back up
press Menu>Setup>Software
manager>Restore backup and you
will get an on screen confirmation
message, once you choose Yes your
V2
will reboot and the backup will be
applied.
Factory Reset
To reset to factory setting go to Menu>Setup>System>Factory Setting
To Next Page
Loading...