36 System Configuration
Initialize / Format Hard Disk
How to use Pres
s Menu>Setup>Storage>Format Hard Disk
Please note this will delete any recordings or files you have on the HDD
You can format both internal and External Hard Drives
Network Setup
How to use > Press Menu>Setup>Network
- Select the Hard drive you wish to format
and press the Green button the 'select'
- Next press the 'Red' button to Initialize
- You will see a pop up asking you to
confirm, select Yes to format the HDD
Beyonwiz V2 is integrated with Gigabit LAN
Ethernet with RJ 45 connector. You are
recommended to use this network capability
of Beyonwiz V2 to fully enjoy the system.
You can setup the network settings through
this Network Configuration menu.
LAN Connection
The easiest way to connect to your wired
home network is via the LAN connection and
using the Network Wizard either in the initial
set up or by going into the Network menu as
pictured above. Once in the Network menu
select Network Adapter Selection and press
'OK' if you then get a choice between LAN
and WLAN choose LAN and then pres 'OK'
and you will get this screen >
To Next Page
Loading...
