Biddle CA2 - Page 10

INTRODUCTION COMFORT AIR CURTAIN
10
1.4.7 Modifications and changes
No changes or modifications may be made to the unit which
could influence its safety without the approval of Biddle.
Changes or modifications will void the CE declaration.
1.4.8 Components and accessories
Note:
n The type code of components and accessories must
correspond to that of the unit with which they will be
employed.
Components
The following components are delivered separately but always
required:
• b-touch control panel (able to control a maximum of 10
units);
• Outdoor sensor;
• Biddle control cable, available in various lengths;
• only with free-hanging models: set of end caps.
Accessories
The following accessories are available as options:
• Door contact switch;
• Wall bracket set, ‘Standard’ or ‘Design’;
• Threaded rod lining;
• Long-life filter (instead of the standard inlet grates and/or
grilles);
• BMS interface module (instead of control panel);
• Air flow sensor (to detect whether the fans are running).
For CA
2
V and CA
2
Q only: Daikin components
The following Daikin components are required for an
installation:
• Outdoor unit
• Optional: One or more indoor units
• Daikin control panel
• Connections materials, such as cooling lines, wiring, etc.:
See the Installation manual for the outdoor unit