BIGTREETECH CB2 - Using Bluetooth

BIGTREETECH CB2 User Manual
23
5.7. Using Bluetooth
1. To scan for Bluetooth devices, enter the following command, and a list of Bluetooth
devices will appear as shown below:
bluetoothctl --timeout 15 scan on
2. Find your Bluetooth device, for example, if your device name is "HONOR xSport
PRO", locate the corresponding Bluetooth MAC ID as shown below.
3. To connect to a Bluetooth device, enter the following command, connection success
is shown as below
bluetoothctl connect E0:9D:FA:50:CD:4F
⑴ If there's an issue while connecting, as shown below, please restart the Bluetooth
device and repeat steps 1 and 2 to connect.