BIGTREETECH EBB42 CAN

BIGTREETECH
5 / 19
1.2 Parameters
1. External Dimensions: 40mm x 40mm. For further details please read:
BIGTREETECH EBB42 CAN V1.0-SIZE.pdf
2. Installation Dimensions: Hole spacing 31mm x 31mm, M3 screw hole x 4
3. Microprocessor: ARM Cortex-M0 STM32F072C8T6 48MHz
4. Input Voltage: DC12V-DC24V 9A
5. Logic Voltage: DC 3.3V
6. Heating Interface: Heating Rod (E0), maximum output current: 5A
7. Onboard Sensor: ADXL345
8. Fan Interfaces: Two CNC Fans (FAN0, FAN1)
9. Maximum Output Current of Fan Interface: 1A, peak value 1.5A
10. Expansion Interfaces: EndStop, I2C, Probe, RGB, PT100/PT1000, USB
Interface, CAN Interface
11. Motor Drive: Onboard TMC2209
12. Driver Working Mode: UART
13. Stepper Motor Interface: EM
14. Temperature Sensor Interface(Optional): 1 channel 100K NTC or PT1000 (TH0),
1 channel PT100/PT1000
15. USB Communication Interface: USB-Type-C
16. DCDC 5V Maximum Output Current: 1A
1.3 Firmware
BTT EEB42 CAN V1.0 only supports Klipper at the present.