SNMP V3
Specify a name and password for authentication. And dene the access right from an identied IP
address. Once the authentication has succeeded, user from this IP address will be able to view and
modify the data.
SNMP Version: SNMPv2c and SNMPv3
SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2
security. The “c” comes from the fact that SNMPv2c uses the SNMPv1 community string paradigm
for “security”, but is widely accepted as the SNMPv2 standard.
SNMPv3 is a strong authentication mechanism, authorizing with ne granularity for remote monitoring.
Traps supported: Cold Start, Authentication Failure.
The following MIBs are supported:
• From RFC 1213 (MIB-II):
System group
Interfaces group
Address Translation group
IP group
ICMP group
TCP group
UDP group
EGP (not applicable)
Transmission
SNMP group
• From RFC1650 (EtherLike-MIB):
dot3Stats
• From RFC 1493 (Bridge MIB):
dot1dBase group
dot1dTp group
dot1dStp group (if congured as spanning tree)
• From RFC 1471 (PPP/LCP MIB):
pppLink group
pppLqr group
• From RFC 1472 (PPP/Security MIB):
PPP Security Group)
• From RFC 1473 (PPP/IP MIB):
PPP IP Group
• From RFC 1474 (PPP/Bridge MIB):
PPP Bridge Group
• From RFC1573 (IfMIB):
156
To Next Page
Loading...
Need help?
General
