EasyManuals Logo

Billion BiPAC 8520 User Manual

Billion BiPAC 8520
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
Embedded Web Server ( 2 Management IP Accounts)
HTTP Port: This is the port number the routers embedded web server (for web-based conguration)
will use. The default value is the standard HTTP port, 80. Users may specify an alternative if, for
example, they are running a web server on a PC within their LAN.
Management IP Address: You can specify an IP address used to logon and access the routers
web server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, and allowing users
to login from any IP address.
Expire to auto-logout: Specify a time length for the system to auto-logout user from the conguration
session.
Example: User A enters 100 for HTTP port number, species 192.168.1.55 for his/hser own IP
address, and sets the logout time to 100 minutes. The router will allow User A to access only
from the IP address 192.168.1.55 to logon to the Web GUI by typing: http://192.168.1.254:100
in their web browser. After 100 minutes, User A is logged out by the device automatically.
Universal Plug and Play (UPnP)
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with the
feature to control data transfer between devices. UPnP offers many advantages for users running
NAT routers through UPnP NAT Traversal, and on supported systems. By letting the application
control the required settings and removing the need for the user to control the advanced conguration
of their device will make tasks such as port forwarding become easier.
Both users Operating System and its relevant applications must support UPnP in addition to the
router. Windows XP and Windows Me have a native built-in support for UPnP (when the component
is installed). Windows 98 users may have to install the Internet Connection Sharing client from
Windows XP in order to support UpnP feature. Windows 2000 does not support UPnP.
Disable: Check to inactive the router’s UPnP functionality.
Enable: Check to active the router’s UPnP functionality.
UPnP Port: Default setting is 2800. It is highly recommended for users to use this port value. If this
value conicts with other ports that have been used, you are allowed to change the port number.
SNMP Access Control
(Software on a PC within the LAN is required in order to utilize this function) – Simple Network
Management Protocol
Click to enable or disable this function.
SNMP V1 and V2
Read Community: Specify a name to be identied as the Read Community, and an IP address.
This community string will be checked against the string entered in the conguration le. Once the
string name is matched, user who obtains this IP address will be able to view the data.
Write Community: Specify a name to be identied as the Write Community, and an IP address. This
community string will be checked against the string entered in the conguration le. Once the string
name is matched, user from this IP address will be able to view and modify the data.
Trap Community: Specify a name to be identied as the Trap Community, and an IP address. This
community string will be checked against the string entered in the conguration le. Once the string
name is matched, user from this IP address will be sent to SNMP Traps.
155

Other manuals for Billion BiPAC 8520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Billion BiPAC 8520 and is the answer not in the manual?

Billion BiPAC 8520 Specifications

General IconGeneral
BrandBillion
ModelBiPAC 8520
CategoryNetwork Router
LanguageEnglish

Related product manuals