Binder KBF 240 - Replacing the Door Contact Switch (-3 S1 )

Repair work at the outer door
6.2.5 Replacing the door contact switch (-3S1 )
Spare parts:
Door contact switch order no. 5019-0061
Necessary
tools:
Small slotted screwdriver
1. Disconnect the unit from the power supply.
2. Open the door and remove the interior side of the door (chap. 6.2.1)
3. Prize up the clips of the door contact switch (A) and push them from inside out of the door frame (C).
4. Remove the electrical connections (B).
5. Install the new switch by following steps 1 to 4 in reverse order.
CBA
Figure 13: Replacing the door contact switch
A Door frame
B Electrical connections
C Door contact switch
Service Manual KBF (E5.2) 04-2015 49