To Next PageTo Next PageHow to remove condensation or icing from the sides of the inner chamber of Binder climate chamber?
If you observe condensation or icing on the sides of the inner chamber of your Binder climate chamber, defrost the chamber.
General| Brand | Binder |
|---|---|
| Model | MK 115 |
| Category | Climate chamber |
| Language | English |
Explains the hierarchy and meaning of safety signals and symbols used in the manual.
Covers essential safety precautions for installing and operating the chamber.
Specifies the approved applications and limitations for the alternating climate chambers.
Describes the controller display, USB interface, and pilot lamp on the instrument panel.
Illustrates and explains the controls located on the lateral control panel.
Guides on checking the chamber for completeness and handling transport damage.
Provides instructions for safely moving the chamber and securing it for transport.
Information on connecting the chamber to the power supply, including voltage and fuse data.
Explains the interface elements and functions available in the controller's normal display.
Details the different operational modes: Idle, Fixed Value, Timer, Time, and Week programs.
Step-by-step instructions for powering on the chamber and initiating the controller.
Configuration of language, time zone, and temperature unit upon first start-up.
Details how to set temperature and fan speed using the controller's Setpoints menu.
Guides on selecting "Timer program", setting duration, and specifying start time.
Instructions for selecting and initiating a previously created time program.
Step-by-step guide for naming and defining a new time program.
Instructions for selecting and initiating a saved weekly program schedule.
Steps for defining a new weekly program, including naming and course selection.
Covers adding, copying, replacing, and deleting sections within a week program.
Details entering values for weekday, time, setpoints, and functions in program sections.
Explains how information icons and alarm messages are displayed and interpreted.
How to acknowledge alarms and view the list of active alerts.
Details the internal class 1 safety device that permanently shuts off the chamber.
Explains the electronic safety controller and its role in protecting the chamber.
Describes the optional class 2 device for defining high and low temperature limits.
Explains user authorization levels and the impact of password protection on access.
Step-by-step guide for logging into the controller with a specific authorization level.
Covers changing, deleting, and assigning new passwords for authorization levels.
Configuration for serial interfaces, Ethernet, web server, and email settings.
How to activate and deactivate the automated chamber functioning test.
Information on the multi-management software for chamber control and monitoring.
Guidelines for regular maintenance, personnel qualifications, and warranty voidance.
Troubleshooting steps for issues like no power, wrong voltage, or fuse response.
Steps for resolving issues like dark display, unavailable menu functions, or incorrect setpoints.
