Field Description
Classe "Background".
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu for operating mode = Access Point / Bridge
Link Master
Field Description
Channel Plan Only for Operation Mode = 3%% / :# 09
' and Channel = 3
Select the desired channel plan.
The channel plan makes a preselection when a channel is se-
lected. This ensures that no channels overlap, i.e. a distance of
four channels is maintained between the channels used. This is
useful if more access points are used with overlapping radio
cells.
Possible values:
• 311: All channels can be dialled when a channel is selected.
• 3: Depending on the region, operation band, wireless
mode and bandwidth, the channels that have a distance of 4
channels are provided.
• . $: Select the desired channels.
Selected Channels Only for Channel Plan = . $
The currently selected channels are displayed here.
With Add you can add channels. If all available channels are
displayed, you cannot add any more entries.
You can delete entries with the icon.
RTS Threshold Here, you select how the RTS/CTS mechanism is to be
switched on/off.
If you choose . $, you can specify in the input field
the data packet length threshold in bytes (1 - 2346) as of which
the RTS/CTS mechanism is to be used. This makes sense if
several clients that are not in each other's wireless range are
run in one access point. The mechanism can also be switched
bintec elmeg GmbH
8 Wireless LAN
bintec RS Series 159
To Next Page
Loading...
