Field Description
Slave AP location Select whether the APs that the wireless LAN controller is to
manage are located in the LAN or the WAN.
Possible values:
• 0%1 03)! (default value)
• A 23)!
The A 23)! setting is useful if, for example, there is a
wireless LAN controller installed at head office and its APs are
distributed to different branches. If the APs are linked via VPN,
it may be that a connection is terminated. If this happens, the
relevant AP with the setting A 23)! maintains its con-
figuration until the connection is reestablished. It then boots up
and the controller and the AP then resynchronize.
Slave AP LED mode Select the lighting scheme of the slave AP LEDs.
Possible values:
•  (default value): All LEDs show their standard behavi-
or.
• <1#: Only the status LED flashes once per second.
• -$$: All LEDs are deactivated.
9.2.2 Slave AP Autoprofile
The Wireless LAN Controller offers the option of automatically including and configuring an
access point that is being integrated into the network accessible by the WLAN Controller. In
order to be able to automatically assign a configuration to a new access point you have to
configure a profile that is valid for all new access points that match certain criteria.
bintec elmeg GmbH
9 Wireless LAN Controller
bintec RS Series 189
To Next Page
Loading...
Need help?
General
