Field Description
SMS Device You can receive notification of system alerts in text messages.
Select the device to be used to send the text message.
Maximum SMS per Day Limit the maximum number of SMS sent during a single day.
Activating ) 0 allows any number of SMS to be
sent.
The defualt value is 10 SMS per day.
Note: Entering a value of is equivalent to activating ) 0
.
19.4 SNMP
SNMP (Simple Network Management Protocol) is a protocol from the IP protocol family for
transporting management information about network components.
Every SNMP management system contains an MIB. SNMP can be used to configure, con-
trol and administrate various network components from one system. Such an SNMP tool is
included on your device: the Configuration Manager. As SNMP is a standard protocol, you
can use any other SNMP managers, e.g. HPOpenView.
For more information on the SNMP versions, see the relevant RFCs and drafts:
• SNMP V. 1: RFC 1157
• SNMP V. 2c: RFC 1901 - 1908
• SNMP V. 3: RFC 3410 - 3418
19.4.1 SNMP Trap Options
In the event of errors, a message - known as a trap packet - is sent unrequested to monitor
the system.
In the External Reporting->SNMP->SNMP Trap Options menu, you can configure the
sending of traps.
bintec elmeg GmbH
19 External Reporting
bintec RS Series 561
To Next Page
Loading...
Need help?
General
