Field Description
if they are operating on the same or closely adjacent wireless
channels. So if you are operating two or more radio networks
close to each other, it is advisable to allocate the networks to
different channels. Each of these should be spaced at least four
channels apart, as a network also partially occupies the adja-
cent channels.
In the case of manual channel selection, please make sure first
that the APs actually support these channels.
Possible values (according to the selected wireless module pro-
file):
• For Active Radio Profile = @H A $1
Possible values are to & and 3 (default value).
• For Active Radio Profile = @H A $1
Possible values are &, , , and 3 (default value)
Used Channel Only for managed APs.
Displays the channel that is currently in use.
Transmit Power Displays the transmission power. You can select another trans-
mission power.
Possible values:
• '? (default value): The maximum antenna power is used.
• :
• :
• :
• :
• :
• , :
Assigned Wireless
Network (VSS)
Displays the wireless networks that are currently assigned.
bintec elmeg GmbH
9 Wireless LAN Controller
bintec RS Series 195
To Next Page
Loading...
