Field Description
Note
When the DHCP lease expires or when the device is re-
started, the routes that consist from the combination of DH-
CP settings and those made here are initially deleted once
more from the active routing. If the DHCP is reconfigured
they are re-generated and re-activated.
Interface Select the interface to be used for this route.
Route Class Select the type of Route Class.
Possible values:
• (default value): Defines a route with the default
parameters.
• ?: Select whether the route is to be defined with ex-
tended parameters. If the function is active, a route is created
with extended routing parameters such as source interface
and source IP address, as well as protocol, source and des-
tination port, type of service (TOS) and the status of the
device interface.
Fields in the menu Route Parameters
Field Description
Local IP Address Only for Route Type = 5$1 A $%,
@ A $% or )79 A
$%
Enter the own IP address of the router on the selected interface.
Destination IP Ad-
dress/Netmask
Only for Route Type @ A $% or )
79 A $%
Enter the IP address of the destination host or destination net-
work.
When Route Type = )79 A $%
Also enter the relevant netmask in the second field.
bintec elmeg GmbH
10 Networking
bintec RS Series 227
To Next Page
Loading...
Need help?
General
