Field Description
call to go online and set up a PPTP connection.
The function is enabled with "1.
The function is disabled by default.
Note that you must activate the relevant option on the gateways
of both partners. An ISDN connection is usually required for this
function. Without ISDN, callback is only to be activated in spe-
cial applications.
Incoming ISDN Num-
ber
Only if Callback is enabled.
Enter the ISDN number from which the remote device calls the
local device (calling party number).
Outgoing ISDN Num-
ber
Only if Callback is enabled.
Enter the ISDN number with which the local device calls the re-
mote device calls (called party number).
Fields in the Dial Port Selection (only if callback = activated)
Field Description
Selected Ports
Enter the ISDN port over which callback is carried out.
Possible values:
• 311 : The callback is routed over an available ISDN
port.
• +%$( +: In Specific Ports You can select the re-
quired ISDN port.
Specific Ports Only for Selected Ports = +%$( +, you can select ad-
ditional ports with Add.
bintec elmeg GmbH
14 VPN
bintec RS Series 409
To Next Page
Loading...
