To Next PageTo Next Page
Need help?Do you have a question about the Bio Bronpi HYDROBOX and is the answer not in the manual?
General| Brand | Bio Bronpi |
|---|---|
| Model | HYDROBOX |
| Category | Boiler |
| Language | English |
Boiler restarts after power loss; electrical protection via fuse.
Protects against smoke outlet issues and hopper overheating.
Monitors water temperature and airflow for safe operation.
Ensures proper system pressure and warns of low fuel levels.
Emphasizes pressure gauge and expansion vessel sizing for safe installation.
Details required certifications and quality standards for wood pellets.
Rules for pellet transport and storage to maintain quality.
Guides on connecting an optional annexed pellet tank.
Details safety precautions for installation environment and procedures.
Covers boiler heat warnings, fire response, and prohibited extinguishing methods.
Details UK HETAS regulations and flue installation requirements.
Details mandatory requirements for chimney installation and operation.
Describes safety valves and expansion vessel requirements.
Covers pre-startup checks and importance of feed water quality.
Identifies hydraulic connection points on the boiler.
Groups assembly observation, handle, and ashtray checks.
Details the technical information displayed about the boiler's status.
Explains the function of each button for menu selection and navigation.
Explains the meaning of the various LED indicators on the display.
Procedure to recalibrate the touch screen if inaccuracies occur.
Details the technical information displayed about the boiler's status.
Describes the boiler's operation after ignition stabilization.
Details adjustments for water temperature and working power.
Explains boiler behavior when temperature setpoints are met.
Explains the automatic process of cleaning the burner during operation.
Details how alarms are displayed and the initial cooling process.
Allows modification of boiler power output and auger loading time.
Adjusts fan speed for optimal smoke extraction.
Sets desired water temperature for boiler and buffer tank.
Selects operating mode based on heating and SHW needs.
Option to enable/disable remote control functionality.
Enables timer and allows modification of on/off time slots.
Sets specific on/off times for daily, weekly, or weekend schedules.
Configures date, time, language, and keyboard direction.
Modifies the contrast of the display's light.
Access to technical menu and viewing node list.
Lists all possible alarm codes and their descriptions.
Instructions for cleaning the burner, including weekly tasks.
Instructions for cleaning the ash pan and checking door seals.
Procedures for cleaning chimney, glass, and the boiler exterior.
Procedures for cleaning ash registers and fume passages.
Shows the electrical connections for Hydrobox and Hydrotex models.
Shows the electrical connections for the Hydroconfort model.
Details conditions for warranty validity and invalidity.
Lists warranty exclusions and manufacturer's liability limitations.
Steps to follow in case of equipment malfunction.
