Patient Monitor User’s Manual
1-8
area.
5. SpO2 parameter area: The current SpO2 and its high and
low alarm limits are shown in the area.
6. SpO2 waveform area: The waveform shown in the area is
current SpO
2
volume curve.
7. Physiological alarm area: Current physiological alarm
information is shown in the area.
8. Technical alarm and prompt information area: Current
technical alarm and prompt information are shown in the
area.
9. Alarm status area: Alarm status symbols are shown in the
area.
10. Resp parameter area: The current Resp and its high and
low alarm limits are shown in the area.
11. System time: Current time is shown in the area.
12. Battery symbol: The symbol indicates the current quantity
of electricity of batteries and whether the device is
connecting power source, the alternating-current symbol
is above battery symbol when the device is connecting
power source.
To Next Page
Loading...
