10 Instruction Manual TProfessional Basic 06/2011
Ensure that both the rear and bottom ventilation slits not clogged by
dust or other material. Danger of overheating!
Let equilibrate the TProfessional Basic Thermocycler to room
temperature before starting operation.
There must be sufficient distance between the ventilation slots on the
rear side of the Thermocycler and a wall or another instrument (min
10 cm). Danger of overheating!
This instrument is designed and certified to meet EN 61010-1 safety
standards. It should not be modified or altered in any way. Alteration
of this instrument will void the warranty, void the EN61010-1
certification, and create a potential safety hazard
.
Place the TProfessional Basic Thermocycler on a stable, non
flammable surface in a dry, safe environment. For details see
working conditions in table “Technical specifications” (see chapter
1.3).
Do not use alcohol (e.g. methanol, ethanol), organic solvents or
abrasives to clean the instrument.
For transports always use the original Biometra box.
To Next Page
Loading...
