Biometra TProfessional Basic Gradient - Set Lid Temperature; Enter Step Temperature and Time

26 Instruction Manual TProfessional Basic 06/2011
5.3.4 Set lid temperature
Note: Thanks to the design of the new High Performance Smart Lid, lower lid temperatures can
be used for thermocycling than in the past. Thanks to the lower lid temperature a higher
temperature uniformity between samples can be achieved.
The recommended lid temperature is 99.0°C.
Enter temperature and confirm with [Enter] or step to the next field with cursor key.
5.3.5 Enter step temperature and time
Use cursor keys to navigate in the programming table.
Note: Each setting is confirmed with [Enter]. The cursor moves automatically to the next field.
Alternatively, you can confirm a value by moving forward with the cursor keys.