Biometra TProfessional Basic Gradient - Cool below Ambient Temperature; Program Pause; Save Program

28 Instruction Manual TProfessional Basic 06/2011
The loop is shown as a bracket at the left side of the spreadsheet.
Note: Total cycler number = (number of back loops) + 1, e.g. enter 24 for a total cycle number
of 25.
5.3.7 Cool below ambient temperature
After the program has been finished, samples can be kept at below ambient temperature.
Note: To save lifetime of Peltier elements, a temperature of 15°C for the final step rather than
4°C is recommended.
5.3.8 Program Pause
To hold a temperature for an indefinite time enter “0”. After confirming with [Enter] the word
“pause” is shown.
5.3.9 Save program
Press button [Save / Save as].