To Next PageTo Next Page
Need help?Do you have a question about the Bitzer ECOSTAR LHV6/2DC-3.F1 and is the answer not in the manual?
General| Brand | Bitzer |
|---|---|
| Model | ECOSTAR LHV6/2DC-3.F1 |
| Category | Air Handlers |
| Language | English |
Explains setting up the control system. Factory setting for energy-optimized operation.
Describes the control logic and fan modes.
Details noise-optimized operation of condenser fans.
Explains how to change parameters and their values.
Details the procedure to power on the control unit via menu.
Lists default factory settings for language, refrigerant, and operating modes.
Describes user profiles and access levels for settings.
Shows the physical locations of the terminal boxes.
Lists optional accessories for wiring diagrams.
Shows integrated measurement points for automatic control.
Explains selectable compressor control modes.
Describes suction pressure-guided compressor control.
Details temperature-guided control for one cold store.
Details methods to increase suction pressure for better efficiency.
Explains using a weekly timer for suction pressure adjustments.
Describes setting suction pressure infinitely via setpoint adjustment.
Explains controlling suction pressure via digital inputs.
Details how to reduce condensing pressure by controlling fan speed.
Details the noise-optimized operation of condenser fans.
Describes how a sound insulation hood reduces noise.
Explains the purpose and operation of the winter start function.
Explains setting a second setpoint for evaporation temperature.
Describes how to set fan modes using digital inputs.
Details activating Winter Start via digital input.
Explains the heat recovery function and its activation.
Lists the voltage requirements for the unit.
Specifies cable sizes for connections.
Details the specifications for the status message relay.
Specifies the nominal voltage for the solenoid valve.
Details requirements for digital input contacts.
Explains the connection for setpoint adjustment.
Specifies the sensor type and cable requirements.
Lists protection ratings for various components.
Specifies requirements for residual current circuit breakers.
Provides checklists for common display and fault lamp issues.
Identifies the alarm number format.
Explains the classification and format of failure codes.
Addresses issues when fault lamp is on/off and display shows info.
Covers high voltage warnings and essential shutdown steps before opening boxes.
Explains how to operate the compressor without the frequency inverter.
Details direct compressor connection and essential safety precautions.
Details setting control to OFF, safety steps, and bridging the regulator.
Covers setting control to OFF and selecting YES to reset.
States the menu structure applies to Ecostar software version 1.05.
Explains the purpose of menu numbers for identification.
Describes read-only menus where parameters cannot be changed.
Describes menus where parameters can be entered or changed.
Indicates menus that are always displayed.
Indicates menus displayed only after selecting corresponding functions.
States the English version represents factory settings.
