Settings on the Technician Menu
Flushing the descaler
1. On the Technician display, touch Delime.
2. Touch Delime Program.
3. Touch Delime.
4. Touch Delime Flush.
The flushing program starts, and the displays shows the current step of the process.
Cook to Perfection
Use this function to enable or disable automatic recalculation of the bake time in
case of mistakes such during the baking process. Depending on software can also
be found under SuperUser Settings.
Enabling or Disabling Automatic Cook to Perfection
1. On the Technician (or SuperUser) display, touch Cook to Perfection.
2. Touch CTP enabled, drag your finger up or down to enable or disable
bake time corrections, and then touch OK.
Specifying Cook to Perfection Tolerance
1. On the Technician display, touch Cook to Perfection.
2. Touch CTP tolerance, drag your finger up or down to select the preferred
value and then touch OK.
Specifying Cook to Perfection Threshold
1. On Technician (SuperUser Setting) display, touch Cook to Perfection.
2. Touch CTP threshold, drag your finger up or down to select the preferred
value and then touch OK.
32 SERVICE MANUAL
To Next Page
Loading...
Need help?
General
