BMC 3B Luna G3 APAP User Manual

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
9 / 48
Auto On
With this feature, the device automatically initiates therapy when you breathe into
the mask. This feature is always enabled.
SmartC
With this feature, the device adjusts Treat P according to the patient's respiratory
event during a certain time.
SmartA
With this feature, the device adjusts Min APAP, Smart P and Max APAP according to
the patient's respiratory event during a certain time.
CPAP
Continuous Positive Airway Pressure.
iCode
A feature that is intended to give access to compliance and therapy management
information. The “iCode” consists of six separate codes displayed in the Patient
Menu, each code is a sequence of numbers. The “iCode QR” and “iCode QR+”
display two-dimensional codes.
LPM
Liters Per Minute.
OSA
Obstructive Sleep Apnea.
Patient Menu
The display mode in which you can change patient-adjustable device settings,
such as the starting pressure for the Ramp feature.
Ramp
A feature that may increase patient comfort when therapy is started. It can reduce
pressure and then gradually increase the pressure to the prescription setting so the
patient can fall asleep more comfortably.
Reslex
A therapy feature that is enabled by your home care provider to provide pressure
relief during exhalation.
Standby State
The state of the device when power is applied but the airflow is turned off.
min
Means the time unit “minute”.
h
Means the time unit “hour”.
yy mm dd / mm dd yy / dd mm yy
Denotes date.

BMC 3B Luna G3 APAP Specifications

General

Brand	BMC
Model	3B Luna G3 APAP
Category	Medical Equipment
Language	English