BMC 3B Luna G3 APAP

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
21 / 48
Fig. 14-1
WARNING!
• Turn the device off and allow approximately 15 minutes for the heater plate and
water to cool.
14.1.2 Filling Water
(1) Open the cap, as shown in Fig. 14-2, and fill the water chamber with
approximately 360 mL of water, as shown in Fig. 14-3. Make sure that the water does
not exceed the maximum water level line.
Fig. 14-2
Fig. 14-3
(2) Open the cap, and fill the water chamber with approximately 360 ml of water,
as shown in Fig. 14-4. Make sure that the water does not exceed the maximum
water level line.