BMC 3B Luna G3 APAP User Manual

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
14 / 48
(2) Install the filter cap containing the air filter to the device, as shown in Fig. 12-2.
Fig. 12-2
(3) Change the air filter and filter cap to the PM2.5 filter, as shown in Fig. 12-3.
PM2.5 Filter
Fig. 12-3
WARNINGS!
• Do not block the gas INTAKE PORT, thereby interfering with the therapy.
• Nebulisation or humidification can increase the resistance of breathing system
filters and the operator must monitor the breathing system filter frequently for
increased resistance and blockage to ensure the delivery of the therapeutic
pressure.
CAUTIONS!
• The air filter or the PM2.5 filter must be in place when the device is operating.
• Device must be unplugged when installing the air filter and filter cap or PM2.5
filter.
12.3 Connecting to Power
(1) Insert the plug of the power adapter into the DC Inlet on the back of the device.
(2) Connect the power cord to the power adapter.
(3) Plug the other end of the power cord into the power outlet.

BMC 3B Luna G3 APAP Specifications

General

Brand	BMC
Model	3B Luna G3 APAP
Category	Medical Equipment
Language	English