BMC 3B Luna G3 APAP User Manual

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
34 / 48
18.3 Cleaning the Mask and Headgear
For details, refer to the cleaning instructions in the user manual for the mask.
18.4 Cleaning the Enclosure
Wipe the surface of the device with a soft, slightly damp cloth.
CAUTIONS!
• The device can only be used after the enclosure is dry, so that no moisture enters
the device.
• It is recommended to clean the enclosure once a week.
18.5 Cleaning the Tubing
(1) Remove the tubing from the device and mask before cleaning.
(2) Hold the cuff of the tubing and gently pull it away from the device as shown in
Fig. 18-4. Or disconnect the power of the heated tubing, then hold the cuff of the
heated tubing and pull it away from the device, as shown in Fig. 18-5.
Fig. 18-4
Fig. 18-5
(3) Hold both the cuff of the air tubing and the swivel of the mask, then gently pull
apart as shown in Fig. 18-6.
Fig. 18-6

BMC 3B Luna G3 APAP Specifications

General

Brand	BMC
Model	3B Luna G3 APAP
Category	Medical Equipment
Language	English