Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
29 / 48
16.2 Options of the Patient Menu and Corresponding
Descriptions
There are five humidity levels available. As the
numbering increases, the humidity rises
accordingly. “Off” means the humidifier is
turned off.
Set humidifier to preheat by adjusting this
option. This feature automatically turns off after
30 minutes.
This feature enables the device to
automatically reduce the treatment pressure
when the patient exhales, so as to make the
user more comfortable. The higher the
numbering is, the more pressure the device
reduces. “Off” means this feature is disabled.
There are five heat levels available. As the
numbering increases, the heat rises
accordingly. “Off” means the heat is turned off.
Note: Heated Tubing is displayed in the patient
menu only when it is connected.
In order to increase comfort and help the
patient fall asleep easily, the pressure can
increase gradually, when the Ramp feature is
enabled. The ramp time during which the initial
pressure rises to the prescribed treatment
pressure can be adjusted. As you turn the Knob
to the nearest point, the numbering
increases or decreases by five seconds. The
screen displays a real-time countdown of the
remaining ramp time in seconds.
When the humidifier is on, this feature allows the
airflow to continue for about 15 minutes at a
low pressure (about 2 hPa) after you press the
Start / Stop to discontinue treatment. This
will blow off the vapor left in the water chamber
to avoid any damage to the device. When this
feature is set to “Off”, which means it is
disabled, the airfolw stops delivering air instantly
after you press the Start / Stop .
Set date by adjusting this option.
yy mm dd /
mm dd yy /
dd mm yy
Turn the Knob to choose among three date
formats.
To Next Page
Loading...
Need help?
General
