Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
30 / 48
Set time by adjusting this option.
Turn the Knob to choose between the two
time formats.
Setting screen brightness by adjusting this
option.
The backlight of the LCD screen can be set to
“Auto” or “On”. Turn the Knob to choose
between the two modes. If it is set to “Auto”,
the backlight will turn off automatically after 30
seconds of inactivity. If it is set to “On”, the
backlight will always be on.
Full Face;
Nasal;
Pillow; Other
There are three mask types available, Full Face
(full-face mask), Nasal (nasal mask), and Pillow
(nasal pillow mask). The default mask type is
“Nasal”, but the patient can choose other
suitable masks as well. When the user select
masks other than the above three types of 3B
MEDICAL masks, the patient can identify the
masks as other.
Start the
Mask Fititing
Test
Test whether the mask is worn correctly,the
screen will display the “great” icon if it is
qualified, otherwise the screen will display the
“need to adjust” icon.
iCode,
iCode QR,
iCode QR +
iCode provides access to the patient's
compliance data during a recent time period.
The iCode mode displays data in sequences of
numbers, and the iCode QR / iCode QR +
mode displays data in two-dimensional codes.
Use Time displays how long has the device
been used by the patient. The use time can be
erased.
Reset the use time of the filter, tubing and mask.
30 days/60
days/180
days/365
days /Off
This function is used for setting filter reminder,
tube reminder and mask reminder. After
opening, can set the use time of filter, tube and
mask.
The default setting is “English”.
Displays related information of the device
(Model, SN, Version, ID). This is read-only and
cannot be edited.