Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
33 / 48
WARNINGS!
• Emptying and cleaning the water chamber daily will help prevent mold and
bacteria growth.
• Allow the water in the chamber to cool down to room temperature before
removing it from the device.
CAUTIONS!
• Clean the water chamber only after the water in it cools. Make sure that no water
enters the device.
• After cleaning, rinse the water chamber throughly in clean water to make sure
that no soap residue is left; then wipe it dry with a lint-free cloth, so as to prevent
calcareous accumulations.
• Inspect the water chamber for any leak or damage. Replace the water chamber
if any damage is present.
• It is recommended to clean the water chamber and change the water daily.
18.2 Cleaning the Transfer Box
(1) Removing the Transfer Box: First remove the water chamber from the device,
and then remove the transfer box, as shown in Fig. 18-2.
Fig. 18-2
(2) Cleaning the Transfer Box: Rinse the transfer box throughly in clean water. You
may also clean the transfer box with a soft cloth which does not scratch it (dip the
soft cloth in liquid soap if necessary), rinse it thoroughly, and then wipe it dry with a
soft cloth.
(3) Returning the Transfer Box: As shown in Fig. 18-3.
To Next Page
Loading...
Need help?
General
