Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
25 / 48
There are four different signal icons, as listed in Table 2:
Table 2 Description of Signal Icons
Note:
(1) When the signal is weak, data transmission may become slow and even stop.
(2) The Cellular Module will keep searching for GPRS signals until one is found.
If the signal is strong, the signal icon appears in the Main Screen, as shown in Fig.
15-2 (the signal icons of different strength appear in a similar way).
Fig. 15-2
The device screen will not show the signal icon, if the Cellular Module is connected
to the device improperly or if the Module is not working properly.
WARNING!
• To ensure successful data transmission through the Cellular Module, computers,
televisions, radios or similar devices should not be placed near the Cellular Module.
16. Navigating the Patient Menu
16.1 Steps to Navigate the Patient Menu
16.1.1 Accessing the Main Interface
Connect the power cord and power adapter properly. The screen displays the Main
Interface shown in Fig. 16-1.
To Next Page
Loading...
Need help?
General
