Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual V1.0
16 / 48
(2) Connect the heated tubing joint to the air outlet of the device, and then insert
the power plug into the heated tubing port on the back of the device, as shown in
Fig. 12-6.
Fig. 12-6
CAUTION!
• As the ambient temperature decreases, the humidifier can be reduced to
improve or avoid condensation in the pipeline. If the ambient temperature is too
low, in order to avoid condensation, it is recommended to use the heated tubing.
If the heated tubing is connected correctly, the icon will become a number in
the Main Interface on the screen of the device, as shown in Fig. 12-7.
Fig. 12-7
Turn the Knob to turn on or turn off the heated tubing and to adjust the heat
level according to instructions of the Patient Menu of the device.
There are five heat levels available, and the number of heat level will appear in the
Main Interface on the screen of the device. The number 3 next to the icon
indicating the heat is adjusted to Level 3, as shown in Fig. 12-8.
To Next Page
Loading...
Need help?
General
