BMPRO JAYCOMMAND User Manual

Figure 24: Motor Screen
MOTOR LOCKOUT FEATURE
The motor will be automatically locked out if a high input is detected on the
brakes. This will be shown on the JAYCOMMAND unit at pin 64.
The motor cannot be turned back on until the lockout is disabled.
If the motor is locked, the APP will show a pop-up.
Figure 25: Motor lockout
The motor can be turned back on by:
• Using the redundancy switches on the CONTROLLER.
• Sending leveling commands with the leveler.
27

BMPRO JAYCOMMAND Specifications

General

Brand	BMPRO
Model	JAYCOMMAND
Category	Controller
Language	English