5. How do I create a Google Account?
If you don’t have a Google Account, you can create one by pressing the
Google Play icon on the CONTROLLER main screen and following the
prompts.
6. How do I change the date and time on my CONTROLLER?
1. Tap the Main screen icon to return to the CONTROLLER main screen.
2. Tap the Settings icon.
3. Select Systems > Date & Time to adjust, date, time and time zone.
7. I can’t use the CONTROLLER and why does it display 88?
The CONTROLLER will display 88 on its menu display if there is a system
error which prevents the use of the JAYCOMMAND system. If you encounter
an 88 error, please contact your RV dealership for further assistance.
SWITCH
8. I’ve replaced the SWITCH in my RV, but it doesn’t work?
You may need to pair the SWITCH to the NODE before you can use the
switch. The SWITCH is paired to the NODE in four steps:
1. Using the < > buttons on the
CONTROLLER, navigate to the
‘PA’ menu item.
2. When ‘PA’ appears on the display,
press the RET button to start
the pairing process between the
SWITCH & NODE.
3. Press any two buttons on the
SWITCH at the same time.
4. Press EXT on the CONTROLLER
to accept the pairing of the
SWITCH to the NODE.
44
To Next Page
Loading...
Need help?
General
