EasyManuals Logo

BMPRO JAYCOMMAND User Manual

BMPRO JAYCOMMAND
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
ENERGY CENTER SETTINGS
The Energy Center Settings are used to set the parameters to control AGS usage.
To access Energy Center Settings:
1. From the APP home screen, press the Settings icon
2. Press Energy Center Settings.
Use AGS to Support
This setting is used to determine if AGS will support battery levels, climate or
both.
•  Battery Levels: the generator will turn on and run until the battery is charged
to the set target voltage.
•  Climate: the generator will turn on so the air conditioner can run. If the
temperature of the RV climbs above the set point in the Climate screen, AGS
will turn the generator on and the generator will run until the temperature
comes back down to the set point.
•  Both: the generator will turn on and run until both the battery and climate
levels reach the set points.
Battery levels
The minimum battery voltage level which automatically starts battery charging
from the generator can be set using this setting. Battery charging will stop when
the target voltage is reached.
AGS monitors both system voltage and RV battery voltage and uses the greater
of the two to determine whether to turn the generator on or off.
Figure 32: Energy Center Settings
32

Other manuals for BMPRO JAYCOMMAND

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMPRO JAYCOMMAND and is the answer not in the manual?

BMPRO JAYCOMMAND Specifications

General IconGeneral
BrandBMPRO
ModelJAYCOMMAND
CategoryController
LanguageEnglish

Related product manuals