FUEL
The fuel level is also monitored and displayed in 8 levels.
A warning is displayed if the fuel level is empty.
GENERATOR LOCKOUT FEATURE
The generator will be automatically locked out if a high input is detected on the
brakes. This will be shown on the JAYCOMMAND unit at pin 64.
The generator cannot be turned back on until the lockout is disabled.
The APP will not show a pop-up if the generator is locked out.
The lockout can be disabled by:
• Using the redundancy switches on the CONTROLLER.
• Sending leveling commands with the leveler.
FUEL PUMP RUNNING INDICATOR
If applicable, a running indicator will be displayed under Fuel 1 whenever you
turn the pump on.
Figure 33: Generator Status: No Fault
GENERATOR FAULT
If the Generator Status indicates a fault:
1. Press the Generator Stop icon.
2. Fix the fault with the generator.
3. Press the Generator Start icon.
If the fault has been fixed, when you next turn the generator on from the APP, the
Generator Status will display “No Fault”.
34
To Next Page
Loading...
