FAQS AND TROUBLESHOOTING
PAIRING WITH THE NODE
1. I tried pairing my phone to the NODE, but it didn’t connect?
If pairing fails, before attempting to pair your smartphone again:
1. Toggle the smartphone’s Bluetooth off and on.
2. Toggle the smartphone’s flight mode off and on.
3. Restart the APP.
4. Cycle power to the NODE off and on.
WARNING
If you clear the NODE, remember to pair with the CONTROLLER again.
2. I tried pairing my phone to the NODE but the CONTROLLER displays --?
If the CONTROLLER displays -- when pairing with the NODE, this indicates
the NODE is already paired to four devices and cannot support any more
devices.
In this case, unpair one of the connected mobile devices and try again.
Alternatively, clear all previously paired devices, following the instructions in
Clearing the NODE. Then pair your smartphone and the CONTROLLER again.
CONTROLLER AND APP
3. Does the CONTROLLER connect to Wi-Fi?
Yes, the CONTROLLER can connect to your local Wi-Fi network:
1. Tap the Main screen icon to return to the CONTROLLER main screen.
2. Tap on the Settings icon.
3. Select Network & Internet > Wi-Fi, then connect to your Wi-Fi network.
4. How do I update the APP on my CONTROLLER?
The CONTROLLER is set up to automatically receive APP updates and will
automatically update whenever a new release is available. To allow this to
happen, make sure that you are:
1. Connected to the internet.
2. Logged into your Google account.
43
To Next Page
Loading...
Need help?
General
