EasyManua.ls Logo

BMPRO JAYCOMMAND - ENERGY CENTER; Battery Monitoring and AGS Setup

BMPRO JAYCOMMAND
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENERGY CENTER
BATTERY MONITORING
Battery Monitoring allows you to monitor RV and/or chassis voltages. If no RV
and chassis batteries are connected, the APP will monitor the system voltage of
the NODE.
If the voltage drops below 12V, a warning will appear on the screen.
AUTOMATIC GENERATOR START
You can keep your battery and climate levels steady by using Automatic
Generator Start (AGS).
AGS will keep your levels steady by automatically turning your generator on or
off.
To use AGS, you may need to update the APP.
If AGS is enabled, the APP will attempt to start the generator a total of four times
to try and keep levels steady.
If there are four failed starts, the APP will stop attempting to start the generator.
If the generator fails to start, please consult your generator’s owner’s manual.
Figure 31: Automatic Generator Start
31

Other manuals for BMPRO JAYCOMMAND

Related product manuals