68n
Stopwatch Remote control
Starting and stopping
You want to measure the time between
the starting point and the destination.
1. Select "Timer"
2. Select .
The stopwatch is started and the
marking changes to .
The passing time is displayed next to
the "Timer" function.
To stop the time, select the marked
stop symbol.
Taking an interim time reading
Select .
The interim time is shown on the right.
The stopwatch continues running.
With the ignition key in position 1 and
higher, you can access information
from the computer for display using the
button integrated within the turn signal
lever. Each time the button is pressed
toward the steering column, another
function is displayed in accordance
with the selected settings of the com-
puter.
The display can include:
> Time
> Average fuel consumption (1 and 2)
> Range
> Limit
> Distance
> Time of arrival
> Average speed
> Date
> Stopwatch.
Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG
To Next Page
Loading...
Need help?
General
