To Next Page

To Previous Page

70n

Code: preventing unauthorized persons from starting the engine

Deactivating code

When you are required to enter the

code (ignition key position 1):

1. Enter the code

2. Select "Deactivate".

To correct an entry:

Select "Change" and repeat the code

entry.

After three incorrect code entries

or after three attempts to start the

engine without a code entry, an alarm

sounds for 30 seconds; refer also to

Emergency deactivation.<

Emergency deactivation

Emergency deactivation can also be

carried out before the three attempts to

start the engine or three incorrect code

entries have been made and the alarm

sounded.

1. Disconnect the battery and wait

about 5 minutes before reconnecting

it; refer to Owner's Manual for Vehi-

cle

2. Turn the ignition key to position 1.

A ten-minute countdown appears on

the screen.

After the ten minutes have elapsed, you

can start the engine.

Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG

Questions and Answers:

Need help?

Do you have a question about the BMW ONBOARD COMPUTER and is the answer not in the manual?

BMW ONBOARD COMPUTER Specifications

General