18n
Explanation of function selection
To help you get oriented as quickly as
possible, the individual selection proce-
dures are provided immediately below
each menu option.
Individual control and entry processes
may include the following elements:
>
Buttons that you press
>
Functions that you select using the
right-hand rotary button. "Selecting
functions", refer to page 16
>
The right-hand rotary button appears
with arrows for control procedures in
which it is pressed or turned only.
Individual steps are separated by the
symbol.
An example: setting the date
Here setting the date serves as an
example to illustrate the control
concept:
1. Select "MENU"
2. Select "Set"
3. Select "Date"
4. Select "Set"
5. Select the year
6. Turn the right-hand rotary button to
set the year
7. Press the right-hand rotary button to
save
8. Set and then save the month and day
with the same procedure.
The system adopts the selected set-
tings for the date
9. Select .
You exit the date entry mode once
you complete this final step.
You can also select the order in which
the elements of the date will be dis-
played: you can display the days (dd)
first and then the months (mm) – or you
can have them displayed in the oppo-
site order.
To exit a function or a selection
mode accidentally selected,
please reselect it again. Then you can
select any desired function.
<
Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG
To Next Page
Loading...
Need help?
General
