16n
Control concept
MENU selection
The onboard computer integrates an
extensive range of functions. Select the
top menu (MENU) for a list of the
various functions, refer to page 12.
Select "MENU"
When you select a function from the
MENU, a list of selection options or of
submenus will appear in the display:
>
For information on selecting func-
tions, refer to "Selecting function"
>
For information on how to request a
display of additional functions, refer
to the section on "Additional func-
tions"
>
For information on settings for menu
selection, refer to "Resetting history"
on page 17
>
To return to the higher menu level,
refer to the "Selecting return symbol"
section on page 17
>
For a display of additional entries in
lists, refer to "Scrolling forward and
back" on page 17.
To return to the main MENU from any
other menu/any other function:
Selecting functions
To select a function, use the right-hand
rotary button to complete the two
following steps:
1. Mark the function
Turn the right-hand rotary button
until the desired function is high-
lighted
2. Confirm your selection
Press the right-hand rotary button.
On the following pages these two steps
are summarized as:
Select "Function“.
Additional functions
Additional functions can be displayed
using the symbol.
Turn the right-hand rotary button
toward the corresponding symbol. Now
you can proceed to mark and select
one of the functions in the display, refer
to "Selecting functions".
Depending on the range of avail-
able functions, it may take a few
seconds until all additional functions
appear on the screen.
<
You can only select those menu
entries or functions that are dis-
played on the screen in white letters.
<
Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG
To Next Page
Loading...
Need help?
General
