Refueling
Fuel specifications
For optimal fuel economy, the
gasoline should be sulfur-free or
very low in sulfur content.
Leaded fuel will destroy the
catalytic converter.
Do not refuel with leaded gaso-
line or gasoline with metallic
additives, e. g. manganese or
Iron.
Ethanol E85 might damage
the engine and fuel supply
system.
Do not refuel with E85, i.e. fuel
with an ethanol content of 85 %,
or with Flex Fuel.
Fuels with a maximum ethanol
content of 10 %, meaning
"E10," may be used for refuel-
ing. Ethanol should satisfy the
quality standards for the US
(ASTM 4806–xx) and Canada
(CGSB-3.511–xx). “xx” - com-
ply with the current standard in
each case.
Recommended fuel qual-
ity
Super unleaded (max. 10 %
ethanol, E10)
89 AKI (95 ROZ/RON)
89 AKI
Refueling procedure
Fuel is highly flammable.
Fire at the fuel tank can
result in fire and explosion.
Do not smoke. Never bring a
naked flame near the fuel tank.
Fuel expands when ex-
posed to heat. When the
tank is overfilled, fuel can escape
and get onto the road. This re-
sults in a danger of falling.
Do not overfill the fuel tank.
Fuel attacks plastic sur-
faces, making them cloudy
or unattractive.
Immediately wipe off plastic parts
after contact with fuel.
Place motorcycle on the center
stand, ensuring that it is resting
on a firm and level support sur-
face.
Open protective cap 2.
Unlock fuel-tank cap 1 with ig-
nition key by turning clockwise,
then swivel it up.
5
98
z
Riding
To Next Page
Loading...
