Adjusting the
instrument cluster
Adjusting the instrument
cluster
The instrument cluster may
only be adjusted when the
motorcycle is stationary.
Move instrument cluster 1 to
desired position by pressing
firmly on the top or bottom
edge. When doing so, make
sure to press in the center so
as to ensure the adjustment is
even.
Mirrors
Adjust mirrors
Move mirror into the desired
position by pressing lightly on
the edge of the glass.
Windshield
Adjust windshield
Switch on ignition.
When you pull away the wind-
screen automatically returns to
the position it was in before the
ignition was switched off.
Press button 1 at top to raise
windshield.
Press button 1 at bottom to
lower windshield.
Switch off ignition.
The windscreen automatically
moves to the bottom limit posi-
tion.
If the windscreen encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windscreen
is stopped and raised slightly.
After a delay of a few seconds
the windscreen again attempts
4
75
z
Operation
To Next Page
Loading...
