BMW R1200RT - Tripmeter

Push the Multi-Controller 1 to
the right and hold it in this po-
sition to reset the travel time.
Timing continues even if you
select some other reading or
switch off the ignition.
Time during which the mo-
torcycle was on the move
since the last reset.
Time during which the mo-
torcycle was at a standstill
since the last reset.
Tripmeter
Selecting tripmeter
Switch on ignition.
Open the Trip menu with
Multi-Controller 1, then select
the desired tripmeter 2.
The following counters can be
displayed:
Tripmeter 1 (Trip 1)
Tripmeter 2 (Trip 2)
Automatic trip meter
(Trip Auto., resets
automatically eight hours after
ignition OFF).
Reset tripmeter
Switch on ignition.
Select desired tripmeter.
Press Multi-Controller 1 to
right and hold until tripmeter 2
has been reset.
4
59
z Operation