will save the vehicle identification
number of this vehicle.
The system can store up to a
maximum of five vehicle identifi-
cation numbers.
A PIN entry will no be required
when this Navigator GPS unit is
activated by turning on the igni-
tion switch in any of these vehi-
cles.
Removing the Navigator GPS re-
ceiver from the motorcycle while
it is switched on will launch a
new PIN request as a security
measure.
Case
Open case
with central locking
OE
If applicable, open the central
locking.
Turn the key to the in the case
lock to the position indicated
by the dot.
Press lock barrel 1 downward.
Release lever 2 pops up.
Pull the release lever all the
way up and open the lid of the
case.
Close case
Pull release lever 2 all the way
up.
Close case lid and press down.
Ensure that no luggage is
trapped between lid and case.
The case can also be
locked if the lock is in the
LOCK position. Under such
circumstances, ensure that the
ignition key is not in the case.
8
150
z
Accessories