Operat. tone - On:
Turn indicators flash and one
tone sounds as confirmation
when the alarm is switched on
or off.
Operat. tone - Off:
Turn indicators flash as only
confirmation when anti-theft
alarm is switched on or off.
Make the desired adjustment
using the Multi-Controller.
Rider's seat
Removing rider's seat
Turn ignition key 2 clockwise.
Lift up front seat 1 slightly at
the rear.
Remove front seat 1 from seat
bracket 3 by pulling to the rear.
with seat heating
OE
Disconnect electrical plug 2 for
seat heater.
Remove front seat and place
on a clean and dry surface with
upholstered side facing down.
Installing driver's seat
with seat heating
OE
Connect plug 1 of the seat
heating.
4
84
z
Operation
To Next Page
Loading...
