Seat heating can be acti-
vated only when the engine
is running.
Select desired heating level
with switch 1.
The passenger seat can be
heated at two levels. The second
level is used for fast heat-up of
the seat; then the switch should
be switched back to the first
level.
2 Switch in middle position:
Heating off.
3 Switch in one-dot position:
50 % heating output.
4 Switch in two-dot position:
100 % heating output.
Symbol 1 appears on the display,
indicating that the rear seat heat-
ing is ON.
If this warning symbol ap-
pears it tells you that the
onboard system voltage is low. If
applicable, the seat heating might
have been temporarily switched
off.
4
74
z
Operation
To Next Page
Loading...
