Disconnect plug 1.
Remove wire spring 1 from
catch and fold to one side.
Remove bulb 2.
Replace defective bulb.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
To protect the glass against
soiling, only grasp the bulb by
the base.
Insert bulb 2, ensuring that the
lug is in the correct position.
The alignment of the
bulb may differ from the
illustration.
Locate wire spring 1 in the
catch.
Insert plug 1.
Place cap 1 in position and fix
by turning it clockwise.
7
132
z
Maintenance
To Next Page
